Hub Carrier Alternatives

[samthornton1990 23]

Carrier has an ovalled hole.

 

Apologies if this has been covered before, tried the search but I think I may be searching the wrong context.

 

What other hub carriers/uprights can I use?

 

Cars a 1.9GTI

 

Cheers

 

 

[welshpug 1,621]

only 309 gti without any modification, many others can be used with modifications to the angle of the strut and size of the balljoint clamp bore.

[samthornton1990 23]

Ah, ok, so I could use a 306 one with a sleeve in the ball joint hole? And have to use adjustable top mounts? Something along those lines

[welshpug 1,621]

close, the damper clamp bore needs machining and sleeving as well, I dont think you can correct the lost camber quite enough with top mounts and you will need small diameter springs.

 

Bridgecraft engineering can do it for you.

Edited April 23, 2017 by welshpug

[jackherer 543]

We inadvertently fitted 306 hubs to my mates 205 once and it wasn't good, he already had 309 wishbones and eccentric top mounts set to full negative camber and with the 306 hubs this resulted in about zero camber overall!

 

TBH I'm surprised 205 1.9 hubs aren't more popular on 306s.

[Tom Fenton 1,524]

 

TBH I'm surprised 205 1.9 hubs aren't more popular on 306s.

Don't tell em!!! It's getting harder and harder finding 205 1.9 uprights to go on 205's let alone the 306 brigade after the buggers!!!

[welshpug 1,621]

lol, I'm sure one of them would have figured out by now.

[calvinhorse 870]

I'm always happy if I get a 306 with 18mm balljoints, I wouldn't be in a rush to go down to 16mm ones ????

[petert 549]

I'm always happy if I get a 306 with 18mm balljoints, I wouldn't be in a rush to go down to 16mm ones

 

Especially if you have spherical bearings on the end of your arms.

[pug_ham 240 3 Cars]

We inadvertently fitted 306 hubs to my mates 205 once and it wasn't good, he already had 309 wishbones and eccentric top mounts set to full negative camber and with the 306 hubs this resulted in about zero camber overall!

 

TBH I'm surprised 205 1.9 hubs aren't more popular on 306s.

 

I'm always happy if I get a 306 with 18mm balljoints, I wouldn't be in a rush to go down to 16mm ones

 

I've thought of this for a few years too but we could always sell them the ovalled 1.9 hubs for machining out to 18mm to use with the later 306 balljoints.

 

g