Jump to content
  • Welcome to 205GTIDrivers.com!

    Hello dear visitor! Feel free to browse but we invite you to register completely free of charge in order to enjoy the full functionality of the website.

Sign in to follow this  
inferno

Bias Pedal Box Dimensions And Mc Recomendations

Recommended Posts

inferno

I would like to know how far the cylinders are from the bulkhead on a bias pedel box. im assuming its variable depending on MC's used , so assuming im useing a 1.9gti brake setup. alternatively if u have a pedal box fitted, id like to know the furthest point from the bulkhead, and position of cylinders in relation to the 4 servo mount holes! a photo in situ with some dimensions drawn on would be ideal! thanx in advance.

Share this post


Link to post
Share on other sites
bren_1.3

at a rough guess, using an original pedal box thats been modified, the cylinders sit maybe 2 inch away from the bulkhead. its not dependable on master cylinder size either AFAIK. size is internal not external so to speak. youll have more than enough room down there.

Share this post


Link to post
Share on other sites
inferno

so you saying the MC's protrude only a few inches into the engine pay?! so not even as far out as the front of the servo?

Share this post


Link to post
Share on other sites
Rob Thomson
so you saying the MC's protrude only a few inches into the engine pay?! so not even as far out as the front of the servo?

Nah, they stick out a couple of inches beyond the front of the servo.

 

This is the only pic I've found of mine, thought I had more...

 

http://img119.imageshack.us/img119/655/enginebayqt9.jpg

Share this post


Link to post
Share on other sites
Chris H

I have a MW Motorsport pedal box and it fits with plenty of clearnace around an MI16 engine

 

Highly recommended if your planning on buying one...much cheaper if you buy direct from him rather than some "peugeot experts"

http://www.mwmotorsport.co.uk/

Share this post


Link to post
Share on other sites
Sign in to follow this  

×