Register now to gain access to all of our features. Once registered and logged in, you will be able to create topics, post replies to existing threads, give reputation to your fellow members, get your own private messenger, post status updates, manage your profile and so much more. If you already have an account, login here - otherwise create an account for free today!
Rear Beam Mounts
Posted 17 July 2017 - 01:25 PM
Posted 17 July 2017 - 10:04 PM
Ø50 x 50 long.
Posted 17 July 2017 - 10:22 PM
Posted 18 July 2017 - 09:33 AM
I've made a few sets and you really need to know what you're doing, in order to get the tolerances correct. Additionally, the front bushes in your pic aren't very good as they don't have a crush tube. Without they'll flog out prematurely. You'll never get the front bushes out without damaging them. As I said earlier, the rear blocks are easy. Just drill a Ø10.5mm hole through some Ø50 bar. The original blocks are offset but that's unnecessary.
I think I used Sustamid for the front bushes.
Edited by petert, 18 July 2017 - 09:46 AM.