Rippthrough 98 Posted January 7, 2008 Anyone got any photo's of a standard 3S head? After them for comparison to my own head, found a few Rallye head photo's but they're not much use being so different. Share this post Link to post Share on other sites
swordfish210 20 Posted January 7, 2008 i dont know if these are any good to you or not: Share this post Link to post Share on other sites
trogboy 17 Posted January 7, 2008 Doesn't look like a standard 3S head to me. Possibly heavily skimmed but I don't remebmer the squish area looking like that? Share this post Link to post Share on other sites
Rippthrough 98 Posted January 7, 2008 (edited) It's a 3S exhaust port, the squish is because it's had a heavy skim, but the inlet seats look like they've been took out to the same size as the rallye heads? Definately look a bit bigger than mine? Might be the photo, my valves seem to be a bit oversize for my valve seats is all. You would happen to have a picture of the inlet ports would you, want them for side by sides with mine to go in the documentation, should really have took a photo of mine when they were standard! Edited January 7, 2008 by Rippthrough Share this post Link to post Share on other sites
swordfish210 20 Posted January 7, 2008 sorry i wasn't very clear, thats not a 3s head, it's a UK spec Rallye (TU3.2) head, i was under the impression thet the ports were the same size. Sorry those were the only pics i took of it before it was ported. And yes it did have a pretty heavy skim cause it was warped to buggery when i got my hands on it. Share this post Link to post Share on other sites
DamirGTI 323 Posted January 7, 2008 Hi ! ... dunno if this helps but heres some pics of TU1 head : Unfortunately i don't have pictures from the insides of the inlet/ex. ports ... Cheers ! Damir Share this post Link to post Share on other sites
Rippthrough 98 Posted January 7, 2008 Hi ! ... dunno if this helps but heres some pics of TU1 head : Unfortunately i don't have pictures from the insides of the inlet/ex. ports ... Cheers ! Damir That's a bit closer, cheers. Share this post Link to post Share on other sites
stu_woac 1 Posted January 7, 2008 ok not standard but thought these to may of helped Share this post Link to post Share on other sites
