Jump to content
  • Welcome to 205GTIDrivers.com!

    Hello dear visitor! Feel free to browse but we invite you to register completely free of charge in order to enjoy the full functionality of the website.

Sign in to follow this  
timmsy19

Mi16 Pas Tensioner

Recommended Posts

timmsy19

bit of a stupid question but does anyone know how to tighten up the PAS belt on the mi16.

 

ive not got a haynes that covers this. pics would be usefull

 

thanks

Share this post


Link to post
Share on other sites
pug_ham

Same as on a diesel 205, can't help with pic's atm but;

  • Loosen the pump mounting bolts through the mounting bracket on the gearbox.
     
     
  • There is a 1/2" square drive hole (iirc) in the mounting bracket near the aft end of the pump.
     
     
  • With asuitably sized extension, turn so the belt tension increases.
     
     
  • Holding the tension, tighten the upper aft mounting bolt (iirc 16m).
     
     
  • If the tension is enough, tighten & then tighten the lower aft & forward bolts.

Graham.

Share this post


Link to post
Share on other sites
timmsy19

thanks Graham.

 

this will be my mission this weekend

Share this post


Link to post
Share on other sites
Sign in to follow this  

×