Injector Flow Rates, Can't Find The Info On Here

[Miles 331 1 Cars]

Just looking at some of these so called Rally spec injectors (Well 306 XSi) part number 260-150-734 these have come off a Mi16 engine with bodies and made I think 200bhp give or take (Dreamweavers old car) These must be flat out at that amount of power, I'm just thinking of replacing them with some GTi6 injectors to help matters, It's getting re-maped anyway so this won;t make any differance.

[Mikey S 29 1 Cars]

http://www.fuelinjector.citymaker.com/page/page/4782443.htm

 

noticed you put 260, are you sure its not 280 for the start of the part number?

[steve@cornwall 100]

Here's another...

 

http://www.injectorcleaning.co.uk/flow.htm

[Anthony 1,000]

0280-150-734 is listed as an injector used on Peugeot, Citroen and Volvo's, but it's only listed as 200cc @ 2.5 bar....

[Miles 331 1 Cars]

Bad light, It is 280 , so by looking at that they both seem to flow the same (Near as), just need the GTi6 data now

[welshpug 1,622]

Sandy knows the gti6 data, something like supposed to be 264cc but flow more than they're supposed to.

[Sandy 189]

Yes, officially 265cc@3 bar, but in practice seems to work more like 300cc.