Jump to content
  • Welcome to 205GTIDrivers.com!

    Hello dear visitor! Feel free to browse but we invite you to register completely free of charge in order to enjoy the full functionality of the website.

Sign in to follow this  
bill

Harness

Recommended Posts

bill

going to get some harnesses in the new year, whats the crack with them, ie 3 point, 4 point, 6 point does it matter which you get, does it depend on your seat? is there a particular one thats better than the others?

Share this post


Link to post
Share on other sites
welshpug

6 point is by far the best, you will need a seat with an appropriate aperture in the base for the lower 2 straps.

 

3 and 4 point are IMO worse than a standard lap belt, I've heard of many injuries sustained in heavy front impacts when using them but none about 6 points, I feel far more secure in them (I have been in several rolls using 4 points!)

Share this post


Link to post
Share on other sites
swordfish210

I've got some Luke 5 points in mine (3 inch FIA jobbies) and they're very good, and a damm site cheaper than the Willans ones i was looking at. I've also got the Sparco Sprint V seats.

 

DSC00030.jpg

Share this post


Link to post
Share on other sites
Baz

I'd be more worried about 2 or 3". :blush:

Share this post


Link to post
Share on other sites
omega

6 is the way to go but they do cost more

Share this post


Link to post
Share on other sites
bren_1.3

6 point 3" harnesses can be had for less than £100 if you look in the right places. brand new aswell.

 

i bought mine off ebay for circa £80 dated till 2012 made by SRS..

 

EDIT: ive got my eye on a pair that are compatible with HANS devices that are still £30 apiece with a day to go!

Edited by bren_1.3

Share this post


Link to post
Share on other sites
bill

cheers for the replys, first thing i'd best do is dig out my bucket seats and see what harnesses they'll take

Share this post


Link to post
Share on other sites
Baz
Ricco-racing.com are pretty unbeatable, and great quality with nice alloy quick-adjusters too. :P Edited by Baz

Share this post


Link to post
Share on other sites
Spiky

i got 6 and 3",

 

i went for 3" as i broke my collar bone a few years back (football) and found 2" digs in a bit when tight

 

i went for 6, for safety, 5 or 6 would be a good choice

 

and i dont rate the seat belt type one's , not becuase they not safe, but just becuase they are a pain in the arse to get in and out of :P

Share this post


Link to post
Share on other sites
Jrod

Always 3" straps, NEVER 3 point.

Share this post


Link to post
Share on other sites
omega

also check the width of the straps the wider the better as it spreads the load,just make sure they not to wide for your shoulders if you are a small bloke as they can slip

Share this post


Link to post
Share on other sites
jackherer

My mate crashed his 205 at Brands, the driver had 3 inch harnesses and was fine, the passenger had 2 inch harnesses and was off work for a week with bruising from the harnesses on his shoulders.

Share this post


Link to post
Share on other sites
Sign in to follow this  

×