Jump to content
  • Welcome to 205GTIDrivers.com!

    Hello dear visitor! Feel free to browse but we invite you to register completely free of charge in order to enjoy the full functionality of the website.

Sign in to follow this  
pavlony

Unknown Cr

Recommended Posts

pavlony

I am confused about CR. During rebuilding, head is

overskimed,about 0,8mm under standard hight.

Volume of combustion chamber is now 35 ccm.

 

Top of the block and liners are skimed 0.2 mm due

deformation.

 

DFW pistons sits 0.95 down in the bore

D6C pistons sits 0.35 (skimed 0.2mm trying to egalize

CR).

 

when I try to calculate CR with standar head gasket, i

get to high CR in both cases. Mean over 10.8:1

 

Any help is appreciated about solving this mess.

Share this post


Link to post
Share on other sites
B1ack_Mi16

If you are using D6C pistons with 35cc head chamber it will be about 11.2:1 compression.

Share this post


Link to post
Share on other sites
Sign in to follow this  

×