Jump to content
  • Welcome to 205GTIDrivers.com!

    Hello dear visitor! Feel free to browse but we invite you to register completely free of charge in order to enjoy the full functionality of the website.

Sign in to follow this  
Guest georgerbrs

Ruddy Gearbox Again

Recommended Posts

Guest georgerbrs

I am swapping from a 205 gearbox to a 405 gearbox to be used in my 205 (1.9) i'm guessing that the TDC sensor will now fit in the hole circled in red in the picture below as apposed to being held in place by the strange plastic holder on the 205 box. (which coincidentally i broke when taking the box out, as well as the top engone mount, aren't i a pro)

 

http://i142.photobucket.com/albums/r86/geo...46tdcmarked.jpg

 

If so, it seems to me that the sensor will now be a few degree's higher, will this make the engine run badly or am i being ridiculous?

 

Also, does anyone know where i can get the insert to fit into said hole in 405 gearbox to hold TDC sensor in place?

 

I know its a lot of questions, any answers much appreciated.

 

Thanks

 

George

Share this post


Link to post
Share on other sites
Miles

Only if you car run's the Motronic will you need a TDC sensor as it uses the teeth on the flywheel for crank position, If not bin it as it's a never used diag tool

Share this post


Link to post
Share on other sites
Sign in to follow this  

×