Jump to content
  • Welcome to 205GTIDrivers.com!

    Hello dear visitor! Feel free to browse but we invite you to register completely free of charge in order to enjoy the full functionality of the website.

Sign in to follow this  
TheLarneMan

Mi16 Oil Filler Hose Size

Recommended Posts

TheLarneMan

Folks,

 

I need to replace the oil filler hose on my Mi16 engine.

The pipework has been re-routed slightly as I have fitted throttle bodies and I'm using a generic bit of tubing at the minute.

 

Does anyone know the diameter of the outlet on the engine and the outlet at the bottom of the plastic filler?

 

Cheers.

 

 

Share this post


Link to post
Share on other sites
TheLarneMan

For future reference, both outlets are 25mm.

 

As it turns out, I need to replace all breather hoses so I'll probably just buy the set from BakerBM instead of re-doing my custom setup with generic hoses.

 

Also, the outlet on the cam cover is 14mm, the smaller outlet at the bottom of the engine is 14mm and the outlet on the side of the plastic filler is 19mm.

  • Like 1

Share this post


Link to post
Share on other sites
jackherer

Talk to Stew @ BakerBM, he is supplying a hybrid set of breathers for my Mi16 on TBs, I can't remember the details but IIRC it is a mix of 8v and 16v parts.

Share this post


Link to post
Share on other sites
Miles

You can use the 8v pipes, not quite ideal but it work's, The neatest way I've seen is a catch/filler tank on the inner wing where the washer bottle was with generic pipes going to and from it

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×