bren_1.3 1 Posted September 27, 2008 hello all, im just looking for the thickest repair headgasket available for an alloy blocked TU engine. they all share the same headgasket i believe. wether it be a 1294cc or 1360cc engine? if anyone can provide the part numbers at all? thanks in advance. Share this post Link to post Share on other sites
Sandy 189 Posted September 28, 2008 The repair gasket is 1.6mm IIRC (+0.2mm). The alloy TU3 and TU2J2 gaskets are different part numbers, not sure why, the former is 0209CK (£33) and the latter 0209Q7 (£72!!). Share this post Link to post Share on other sites
jimistdt 1 Posted September 28, 2008 I have a brother that makes gaskets for a living, up to 6mm in thickness if you so desire. It you're interested let me know. Jimi Share this post Link to post Share on other sites
bren_1.3 1 Posted September 28, 2008 The repair gasket is 1.6mm IIRC (+0.2mm). The alloy TU3 and TU2J2 gaskets are different part numbers, not sure why, the former is 0209CK (£33) and the latter 0209Q7 (£72!!). excellent! thankyou very much! I have a brother that makes gaskets for a living, up to 6mm in thickness if you so desire. It you're interested let me know. thankyou for the offer, i will PM you for more details in the future! im sure ill need to! Share this post Link to post Share on other sites
