Jump to content
  • Welcome to 205GTIDrivers.com!

    Hello dear visitor! Feel free to browse but we invite you to register completely free of charge in order to enjoy the full functionality of the website.

Sign in to follow this  
BusEngineer

Front Wings, Where From

Recommended Posts

BusEngineer

Well i had a rather bad day on thursday, we had a tiny bit of snow around these parts in the early hours but combined with a temp drop after it was lethal. My drive is quite steep and id parked diagonally on it in front of the window

Anyway after skating up and down the drive to deice my car i attempted to very carefully get off the drive . . . . No luck, about halfway down whilst very carefully braking it went, and slid sideways into my gate and wall, very nearly demolishing it in the process, after 10 minutes of extremely careful movements i got it out of the drive!

 

But i know have a dented and scrapped drivers wing!! I hate winter!!

 

I ideally want a pair of front wings and after looking on servicebox, as much as id love too, i wont be paying Peugeot prices (£100+ a side)

 

So i need to know where i can get decent quality wings from?? Any ideas and idea of price would be great

 

Cheers

Share this post


Link to post
Share on other sites
SurGie

Yeh i got a quote of £150 a wing per side un-painted, very pricey :)

You will probly get some offer's on here, if u dont find any try escortbuffy from e-bay, he

has approx over 20, 205 gtis he's breaking. He mite live too far away though ?

 

Good luck in finding some decent one's...

Share this post


Link to post
Share on other sites
M@tt

i got some pattern ones on mine which Paintguy had to "adjust" slightly but all in all they weren't a bad fit at all, but some can be utter s*ite. The pattern ones were stone chipped protected on the insides and properly prepared before paiiting and have been fine for the 3 years or so that they've been on.

£18 a side iirc!!

 

http://www.perfectpanels.co.uk/index_stockists.htm

Edited by M@tt

Share this post


Link to post
Share on other sites
Cabana

I used Hadrian ones when I replaced mine over the summer. Like M@tt's the fit wasn't perfect immediately, the bottom edge needed twisting out slightly to line up with the door properly and the top corner didn't quite line up with the windscreen A pillar but that was solved with a quick wallop with a hammer :ph34r:

 

It wasn't a huge amount of work to get them lined up and I think you'd be hard pushed to tell the difference now they're fitted, even the holes for the black trim lined up as they should, I could probably get some pics tomorrow if that would be any help. I think they were just under £25 a side when I bought them.

Share this post


Link to post
Share on other sites
Mikey S
if u dont find any try escortbuffy from e-bay, he

has approx over 20, 205 gtis he's breaking.

 

 

seen him on ebay, trying to single handidly wipe out the 205 by the looks of it......

 

 

and no, dont bother with second hand, there an a bitch to remove.

Share this post


Link to post
Share on other sites
Quigs

I had to put a new wing on one of my old 205's and i got it from GSF and it fitted really well for a mickey mouse wing.

 

When you take the old one off it will help to use a hot air gun to soften the sealer that holds it on, and when the new one is fittted use plenty of wax oil on it to help prevent it from rusting.

 

Quigs

Share this post


Link to post
Share on other sites
BusEngineer

Thanks for all the advice guys, much appreciated :)

Share this post


Link to post
Share on other sites
Paul_13

hi there, i have two brand new wings unpainted sitting in my garage, they have a bit of surface rust on them from scratches but can easily be sanded off.

They are not OE though but you can have them for £25

 

Paul

Share this post


Link to post
Share on other sites
Rom

The place doing my respray has said not to get pattern wings. So looks like im shelling out for Gen ;)

Share this post


Link to post
Share on other sites
large
The place doing my respray has said not to get pattern wings. So looks like im shelling out for Gen ;)

What the hell. Tell him straight, unless he is willing to pay the difference he will use what he is given and like it. :( .

Share this post


Link to post
Share on other sites
Rom

I think hes getting at the poor fit. He hasnt refused to fit non gen, but said dont bother with them.

 

At the price im paying, a gen wing is the least of my worries ;)

Share this post


Link to post
Share on other sites
Sign in to follow this  

×