Jump to content
  • Welcome to 205GTIDrivers.com!

    Hello dear visitor! Feel free to browse but we invite you to register completely free of charge in order to enjoy the full functionality of the website.

Sign in to follow this  
chris 417 mi

Not A 205 Xu10j4r But A 405 Xu10j4r......

Recommended Posts

chris 417 mi

Just a quick question with my current project, engine is pretty much in & all plumbed up but i have a slight problem with 1 or 2 hoses and parts :

 

DSC00445.jpg

 

hose with what looks like a vapour pipe to the charcoal canister in the wing ... where does this pipe up too now ?

 

DSC00444.jpg

 

main water hoses (thermostat housing to rad ) the one in the middle is the original 405 hose which fits the rad fine ...but doesnt mate up to the stat housing very well, the one on the right is a 406 hose which fits the thermo housing perfectly but doesnt mate up to the rad. Options ive considered are either joining the ends of the two with a pipe in the middle ...or removing one of the ends and fitting it to the other pipe if this is possible.

 

another shot of the bay

 

DSC00443.jpg

 

and the car it is in ...which started out as a 2.0 8v auto :wacko:

 

DSC00419.jpg

Share this post


Link to post
Share on other sites
welshpug

Isnt it an RS not an R? :wacko:

 

the charcoal canister pipe goes to the small port on the black plastic part on the front side of the throttle body, the pipe with the round inline valve goes to larger port and connects to the rocker cover

 

wondered when someone would finally do one of these, have you stuck with the 6 speed box?

 

an alloy joiner sounds your best bet to join the top hoses together, it'll be far cheaper than a thermostat housing adapter.

 

do I spy a BRAND NEW bumper on top of the car???

Share this post


Link to post
Share on other sites
chris 417 mi

lol it started out as an r :wacko: gti6 inlet & exhaust mani & cams later and ...well :P

 

Nah as it was a xu10j4r it only had the 406 box on , now has 1900 be3 :)

 

the charcoal canister pipe goes to the small port on the black plastic part on the front side of the throttle body,

 

dont suppose you have a pic ?

 

do I spy a BRAND NEW bumper on top of the car???

 

Yup indeed it is and genuine too :P a place near me can get bits fairly cheap, that was £80.

Share this post


Link to post
Share on other sites
welshpug

bang in the middle of your first picture, the port points towards the offside and is about 3-4mm in diameter IIRC, its below the one that points skywards for the breather pipe.

Share this post


Link to post
Share on other sites
chris 417 mi
bang in the middle of your first picture, the port points towards the offside and is about 3-4mm in diameter IIRC, its below the one that points skywards for the breather pipe.

 

excellent cheers :wacko:

Share this post


Link to post
Share on other sites
hexhamstu
bang in the middle of your first picture, the port points towards the offside and is about 3-4mm in diameter IIRC, its below the one that points skywards for the breather pipe.

will you come and live with me, just so when ever i have a question you can instantly answer it in real life? yesterday i was trying to refit the bulbs to the indicators on my car and i spend 35 mins trying to put them in the wrong way up. (the bulb holders where the wrong way up going into the back of the light, the actual bulb was the in correctly :wacko: )

Edited by hexhamstu

Share this post


Link to post
Share on other sites
chris 417 mi
bang in the middle of your first picture, the port points towards the offside and is about 3-4mm in diameter IIRC, its below the one that points skywards for the breather pipe.

 

hmm looks like the pipe has snapped off :wacko:, ill be ok just blanking it off though wont i ?

Share this post


Link to post
Share on other sites
Sign in to follow this  

×