I´m in the procces of adding megasquirt on a 205GTi with a GTi6 engine.
I have all the wiring done using the standard loom and trying to setup the sequential ignition/injection.
The problems I have are with the wheel decoding setup, at the moment I have 114 degrees first tooth angle and i´m experiencing very bad backfires, and the car wont start.
I have spark on all 4 coils and seems to fire in the correct order.
I set the wiring like
first MS spark output-->first cylinder pin acording to autodata
second with second
and so on...
Can the PSA weird naming of the first cylinder the one that sits gearbox side causing problems?
This night i´m going to check the timing with a strobo light....