More Gti Dash In A Base Model Questions!

[calvinhorse 870]

i tryed to add to an old topic but computer said no

so, is there a oil pressure sensor on a vtr block i can use on the gti dash?

and the same for water temp?

 

thankyou please

[bren_1.3 1]

god knows, why dont you buy a haynes manual for a saxo and check out the wiring diagrams? or better still ask the same question on a saxo forum?

[calvinhorse 870]

god knows, why dont you buy a haynes manual for a saxo and check out the wiring diagrams? or better still ask the same question on a saxo forum?

your in a good mood then..

[calvinhorse 870]

chances are people on here have already done this so worth asking

and its in the tu section

and this is what the forum is for

[bren_1.3 1]

no i wasnt in a bad mood at all, but your comments have put me in one, i answered your question as no-one else (after a week of this topic sat on here with no response) had any information for you, so i gave you a few suggestions as to what you could do.

 

and instead of waiting around for an answer why dont you get busy and ask on a saxo forum, where the question would be answered in seconds. or again buy a haynes manual for a saxo to answer your questions!

 

sorry if im stating the obvious but you appear to have missed the obvious avenues of investigation......this forum doesnt have the answer to everything you know.

[calvinhorse 870]

anyone have an answer?

[calvinhorse 870]

sorry bren advice taken just joined saxo sport club.. woop woop

cant wait to hear replies like "replace gauge with speaker"

love you!!

[calvinhorse 870]

temp sender is in the head and oil pressure switch is also in the head.. no use what so ever!!! hah great!!

[stu_woac 1]

oil pressure I thought was in the front of the block behind the down pipe, the one at the bottom is a level switch I believe this is not solid advice just what I have notice

 

if you can find out what wires in the loom is for the oil pressure gauge on the clocks then yes you could plug it on and off you go

[pugrallye 0]

tu engines dont have oil pressure gauge senders, only pressureswitch (light), have to look at water temp sender fitted to your engine, if its only got one pin, you need to search pug for a two pin item

[calvinhorse 870]

and does anyone know why my backlights dont work??

[cybernck 400 1 Cars]

check B3 (+12v) and B4 (ground) and also the dimmer pot (just had a situation with a dodgy one).

[allanallen 528 2 Cars]

check B3 (+12v) and B4 (ground) and also the dimmer pot (just had a situation with a dodgy one).

ahhh excellent idea ill plug the dimmer pot in!!! forgot that!! works perfect now nice one cybrnck!!

[calvinhorse 870]

sorry that w2as my reply my brother didnt log out!!

cheers cybrnck!!!

calvin

[cybernck 400 1 Cars]

no probs .