petert 555 Posted January 16, 2007 After a long battle and lots of dicking around, I've finally got the package in. As you can see from the pics there wasn't a lot of room to spare, even after dropping the engine 15mm and grinding away the body seam. The standard 1.9L downpipe flange bolts straight up, although I shortened the down pipe by approx. 6". Share this post Link to post Share on other sites
Baz 421 Posted January 16, 2007 Blimey that looks close!! Share this post Link to post Share on other sites
Sandy 189 Posted January 16, 2007 A 306 GTi6 decat pipe fits a treat, with the engine tilted about 15mm at the bottom. Share this post Link to post Share on other sites
whizzer71 0 Posted January 16, 2007 You dont need to tilt the engine,just cut and tilt the manifold and then get it re welded by a profesional welder ,did mine on my 205 over a year ago fits a real treat,clears the bulkhead/rack nicely hasnt started blowing or anything nasty like that either. Used a gti6 de cat pipe on mine also, almost like it was made for the car !!! Share this post Link to post Share on other sites
petert 555 Posted January 16, 2007 Could have done that, but I didn't want to have to get it ceramic coated again. Share this post Link to post Share on other sites
Sam 4 Posted January 16, 2007 Peter, do you know anyone that makes GTI6 head to S16/Mi16 exhaust manifold adapters? Share this post Link to post Share on other sites
